XIRRUS XD2240
Power up the device and do a hard reset.
Hold down reset button on bottom of device while plugging in a Power over Ethernet cable to the PoE port of the Access Point from the "To AP" port of a power injector device:
Release the button after 10+ seconds.
Log in with the default credentials.
Plug in another ethernet cable into an ethernet port of a PC from the "To Switch" port of the power injector.
Manually set the ethernet PC interface IP to the same subnet as the default IP of the Access Point which is 10.0.2.1
Open PuTTY and select "SSH" connection type, and enter 10.0.2.1 into the "Host Name (or IP address)" box, then click the "Open" button.
Type admin at both the login as: and password: prompt:
login as: admin
admin@10.0.2.1's password: admin
Xirrus Wi-Fi Array
ArrayOS Version 8.2.4-6871
Copyright (c) 2005-2016 Xirrus, Inc.
http://www.xirrus.com
Check for a license key and reboot.
Type the show system-info command:
X2136035F6D78# show system-info
Hardware Configuration
======================
Model: XD2-240, 1.0GB (1.2GHz)
Component Part Number Serial Number Date
--------- --------------- --------------- -----------------
System XD2-240 X2136035F6D78 2016-Jan-26 22:01
Controller 100-0183-001 0006253944 2016-Jan-26 22:01
IAP Module 1 100-0182-001.0 0001009215 2016-Jan-27 6:11
IAP Module 2 100-0182-001.0 0001009220 2016-Jan-27 6:11
Interface MAC Address(es)
---------- --------------------------
IAPs 48:c0:93:62:7d:80-62:7d:9f
Gigabit 1 48:c0:93:5f:6d:78
Gigabit 2 48:c0:93:5f:6d:79
Software Configuration
======================
Component Version
--------------- -----------------------------------
SCD Firmware 5.00 (Oct 1 2012), Build: 4651
Boot Loader 7.1.0 (Dec 02 2016), Build: 7144
IAP Driver 3.1.0 (Dec 19 2016), Build: 2150
System Software 8.2.4 (Dec 29 2016), Build: 6871
App Signatures navl_signatures-8.2.0.tar.gz
Flash Memory eMMC Flash Disk
License Key 02GY4-MH17F-X6CB3-3JNGX
License Features AOS 8.3 for 2 4x4 radios + RF Performance Manager + RF Analysis
Manager + RF Security Manager + Application Control + 802.11ac + 802.11n
Time this boot: Mon 2018-Mar-19 04:14:00 GMT
Type the configure and reset commands, and confirm with y.
X2136035F6D78# configure
X2136035F6D78(config)# reset
Are you sure you want to reset to factory settings & reboot? [yes/no]: y
Copy all the output from the session into your records.
Right-click PuTTY's titlebar, from that dropdown menu click on "Copy All to Clipboard"
Open the file of record certifying the deconfiguration of this device and use CTRL V to paste all the output from PuTTY into that file. Formatting the text with a fixed-width font helps it look more readable.
End the session.
Turn off/unplug the device and close PuTTy.