Ruckus ZoneDirector 1200

1. Start the console session.

   Plug in serial cable to console port of device from PC COM1 port
   Open PuTTY and select "Serial" connection type, change baud rate (Speed) to 115200 and leave other settings as default.
   Plug power into device and if a power button exists, turn it on.

2. Perform a hard reset.

   Once the boot process is complete use a paperclip to hold down the F/D button until the "Status" LED blinks red.

   /bin/zapd version 1.83.18, Copyright (C) 2004-2006 Ruckus Wireless, Inc. All Rights Reserved. Built Feb 27 2015 at 20:43:39 No Response from BMC...Exiting

   

   Restarting system. GRUB Loading stage1.5.

3. Log in with the default credentials and see how many Access Points it is licensed for.

   Type admin at both the Please login:  and Password:  prompts:

   Please login: admin Password: admin Welcome to the Ruckus Wireless ZoneDirector 1200 Command Line Interface

   Type the enable and show license commands:

   ruckus> enable ruckus# show license License: Model= ZD1200 Max. AP Number= 5 Max. Client Number= 2000 ruckus#

4. Copy all the output from the session into your records.

   Right-click PuTTY's titlebar, from that dropdown menu click on "Copy All to Clipboard"
   Open the file of record certifying the deconfiguration of this device and use CTRL V to paste all the output from PuTTY into that file. Formatting the text with a fixed-width font helps it look more readable.

5. End the session.

   Close PuTTY.