Brocade ICX 6430-48
Start the console session.
Plug in serial cable to console port of device from PC COM1 port
Open PuTTY and select "Serial" connection type, leave baud rate (Speed) and other settings as default.
Plug power into device and if a power button exists, turn it on.
Access boot monitor prompt.
Repeatedly press the b key before the countdown ends. Example output:
Bootloader Version: 10.1.01T310 (Apr 9 2014 - 18:01:02) Model ID: 0.0.0.1.0.0 Enter 'b' to stop at boot monitor: 0 ICX64XX-boot>>
Bypass any configured login.
Type the no password command:
ICX64XX-boot>> no password OK! Skip password check when the system is up.
Type the boot command:
ICX64XX-boot>> boot Booting image from Secondary ## Booting image at 00007fc0 ...
The boot process should list some system details including licenses, then bring you once again to a command prompt.
========================================================================== UNIT 1: SL 1: ICX6430-48 48-port Management Module Serial #: BZQ0443J02S License: BASE_SOFT_PACKAGE (LID: dbsFJJIlFHu) P-ENGINE 0: type DF70, rev 01 P-ENGINE 1: type DF70, rev 01 ========================================================================== UNIT 1: SL 2: ICX6430-SFP 4port 4G Module ========================================================================== 500 MHz ARM processor ARMv5TE, 400 MHz bus 32768 KB flash memory 256 MB DRAM CBLOCKSW2>
Erase all configuration settings.
Type the enable command for elevated privileges, then show license to list any features/keys installed:
CBLOCKSW2>enable No password has been assigned yet... CBLOCKSW2#show license License record empty
Type the erase startup-config command:
CBLOCKSW2#erase startup-config: Erase startup-config Done. dhcp server lease database is also removed
Reboot and check there is no login prompt.
Type the reload command, and confirm with y whenever prompted:
CBLOCKSW2#reload Are you sure? (enter 'y' or 'n'): y Could not verify if the Running Config data has been changed. Do you want to continue the reload anyway? (enter 'y' or 'n'): y Halt and reboot Sent SIGKILL to all processes Requesting system reboot Restarting system.
Further output should bring you to the ICX6430-48 Switch> prompt.
Type the enable command, then the show users command:
ICX6430-48 Switch>enable No password has been assigned yet... ICX6430-48 Switch#show users No username entries
Copy all the output from the session into your records.
Right-click PuTTY's titlebar, from that dropdown menu click on "Copy All to Clipboard"
Open the file of record certifying the deconfiguration of this device and use CTRL V to paste all the output from PuTTY into that file. Formatting the text with a fixed-width font helps it look more readable.
End the session.
Turn off/unplug the device and close PuTTy.