Allied Telesis AT-8000GS/48
Start the console session.
Plug in serial cable to console port of device from PC COM1 port
Open PuTTY and select "Serial" connection type, leave baud rate (Speed) and other settings as default.
Plug power into device and if a power button exists, turn it on.
Switch Unit to Standalone working mode.
Press Esc when prompted and before the countdown ends:
Boot1 Checksum Test...............................PASS Boot2 Checksum Test...............................PASS Flash Image Validation Test.......................PASS BOOT Software Version 1.0.0.11 Built 01-May-2008 17:02:11 ATI8000GS board, 88F5181 CPU based on ARM926EJ-S core. 128MByte SDRAM (DDR2). I-Cache 32KB. D-Cache 32KB. Cache Enabled. Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Type 6 at the Startup Menu to access the Stack menu:
Startup Menu [1] Download Software [2] Erase Flash File [3] Password Recovery Procedure [4] Enter Diagnostic Mode [5] Set Terminal Baud-Rate [6] Stack menu [7] Back Enter your choice or press 'ESC' to exit:
Type 3 at the Stack Menu, then type 1 for standalone working mode, and press Enter:
Stack menu [1] Show unit stack id [2] Set unit stack id [3] Set unit working mode [4] Back Enter your choice or press 'ESC' to exit: Enter unit working mode [1 - standalone, 2 - stacking]: 1 Unit working mode changed to standalone. ==== Press Enter To Continue ====
Keep pressing Esc exiting menus to continue the boot process.
Log in with default credentials and erase configuration.
Type manager for the User Name and friend for the password when prompted to get to the console# prompt:
Exit from boot menu. Continue with flow. Preparing to decompress... 100% Decompressing SW from image-1 100% OK Running from RAM... About to erase CDB. Terminal baud rate will now be set to default! ********************************************************************* *** Running SW Ver. 2.0.0.21 Date 12-Oct-2009 Time 11:12:14 *** ********************************************************************* HW version is 00.00.0c Base Mac address is: 00:15:77:d8:8b:64 Dram size is : 128M bytes Dram first block size is : 98304K bytes Dram first PTR is : 0x2000000 Dram second block size is : 0K bytes Dram second PTR is : 0x8000000 Flash size is: 16M 01-Aug-2007 01:01:06 %CDB-I-LOADCONFIG: Loading running configuration. 01-Aug-2007 01:01:06 %CDB-I-LOADCONFIG: Loading startup configuration. Device configuration: Slot 1 - AT-8000GS/48 ------------------------------------ -- Unit Standalone -- ------------------------------------ 01-Aug-2007 01:01:22 %Entity-I-SEND-ENT-CONF-CHANGE-TRAP: entity configuration change trap. Tapi Version: v1.3.3.1 Core Version: v1.3.3.1 01-Aug-2007 01:01:27 %INIT-I-InitCompleted: Initialization task is completed 01-Aug-2007 01:01:27 %Environment-I-PS-STAT-CHNG: PS# 1 status changed - operational. 01-Aug-2007 01:01:27 %Environment-I-PS-STAT-CHNG: PS# 1 status changed - operational. 01-Aug-2007 01:01:27 %SNMP-I-CDBITEMSNUM: Number of running configuration items loaded: 0 01-Aug-2007 01:01:27 %SNMP-I-CDBITEMSNUM: Number of startup configuration items loaded: 0 User Name:manager Password:friend
Type del startup-config and confirm with y:
console# del startup-config Delete startup-config [y/n]? y 01-Aug-2007 01:01:55 %FILE-I-DELETE: File Delete - file URL flash://startup-config
Copy all the output from the session into your records.
Right-click PuTTY's titlebar, from that dropdown menu click on "Copy All to Clipboard"
Open the file of record certifying the deconfiguration of this device and use CTRL V to paste all the output from PuTTY into that file. Formatting the text with a fixed-width font helps it look more readable.
End the session.
Close PuTTy.